Groundwater arsenic contamination in Brahmaputra river basin: a water quality assessment in Golaghat (Assam), India

Distribution of arsenic (As) and its compound and related toxicology are serious concerns nowadays. Millions of individuals worldwide are suffering from arsenic toxic effect due to drinking of As-contaminated groundwater. The Bengal delta plain, which is formed by the Ganga?CPadma?CMeghna?CBrahmaputra river basin, covering several districts of West Bengal, India, and Bangladesh is considered as the worst As-affected alluvial basin. The present study was carried out to examine As contamination in the state of Assam, an adjoining region of the West Bengal and Bangladesh borders. Two hundred twenty-two groundwater samples were collected from shallow and deep tubewells of six blocks of Golaghat district (Assam). Along with total As, examination of concentration levels of other key parameters, viz., Fe, Mn, Ca, Na, K, and Mg with pH, total hardness, and SO $_{4}^{2-}$ , was also carried out. In respect to the permissible limit formulated by the World Health Organization (WHO; As 0.01 ppm, Fe 1.0 ppm, and Mn 0.3 ppm for potable water), the present study showed that out of the 222 groundwater samples, 67%, 76.4%, and 28.5% were found contaminated with higher metal contents (for total As, Fe, and Mn, respectively). The most badly affected area was the Gamariguri block, where 100% of the samples had As and Fe concentrations above the WHO drinking water guideline values. In this block, the highest As and Fe concentrations were recorded 0.128 and 5.9 ppm, respectively. Tubewell water of depth 180 ± 10 ft found to be more contaminated by As and Fe with 78% and 83% of the samples were tainted with higher concentration of such toxic metals, respectively. A strong significant correlation was observed between As and Fe (0.697 at p < 0.01), suggesting a possible reductive dissolution of As?CFe-bearing minerals for the mobilization of As in the groundwater of the region.     

An analytical force model for orthogonal elliptical vibration cutting technique

The elliptical vibration cutting (EVC) technique has been found to be a promising technique for ultraprecision machining of various materials. In each overlapping EVC cycle, the thickness of cut (TOC) of work material, and the tool velocity get continuously varied. These two inherent phenomena, in fact, introduce transient characteristics into its cutting mechanics, which are considered to be different from the one applied for conventional cutting technique. Recently, a few theoretical models have been developed to understand the material removal mechanism with the EVC technique; however, in those studies, the transient phenomena were not considered. In the present research, an analytical force model for the orthogonal EVC process was developed in order to fully understand the EVC mechanism, and to more accurately predict the transient cutting force values. Three important factors: (i) transient TOC, (ii) transient shear angle, and (iii) transition characteristic of friction reversal were investigated and analyzed mainly based on geometric modeling and the Lee and Shaffer's slip-line solution. Mathematical evaluation shows that they may have significant influence on EVC process, and thus on its output performance. In order to validate the proposed force model, a series of low-frequency orthogonal EVC tests were conducted. The experimental transient cutting force values were compared with the predicted values calculated using the proposed model, and they are found to be in a good agreement with each other.     

Persistence and Dissipation Kinetics of Spiromesifen in Chili and Cotton

In a field study carried out at three different locations, the dissipation of spiromesifen on cotton and chili was studied and its DT₅₀, and DT₉₉ were estimated at each location. Spiromesifen was sprayed on chili at 96 and 192 g a.i. ha⁻¹ and cotton at 120 and 240 g a.i. ha⁻¹. Samples of chili fruits were drawn at 0, 1, 3, 5, 7, 10, 15, 21, 30 days after treatment and that of cotton seed and lint at first picking and harvest. Soil samples were drawn 30 days after treatment from 0 to 15 and 15 to 30 cm layer. Quantification of residues was done on GC–MS in Selected Ion Monitoring (SIM) mode in mass range 271–274 m/z. The LOQ of this method was found 0.033 μg g⁻¹, LOD being 0.01 μg g⁻¹. The DT₅₀ of spiromesifen when applied at recommended doses in chili fruits was found to be 2.18–2.40 days. Ninety-nine percent degradation was found to occur within 14.5–16.3 days after application. Residues of spiromesifen were not detected in cotton seed and lint samples at the first picking. In soil, no residues of spiromesifen were detectable 15 days after treatment.     

Surface signatures of submerged heated jet

The flow induced at the surface of a water body by a submerged heated horizontal turbulent jet was investigated experimentally with the aim of developing parameterizations for surface mean temperature/velocity fields. The jet nozzle diameter was fixed, the depth of the jet beneath the free surface was varied, and two jet Reynolds numbers (5020, 11300) were considered. The surface temperature was measured using a highly sensitive infrared camera, and the near-surface horizontal velocity field was measured using particle image velocimetry. The experimental results were explained using a model based on similarity solutions with variable turbulent viscosity. While classical Schlichting’s solution with constant turbulent viscosity predicts complete similarity for transverse velocity/temperature distributions only in a plane that coincides with the flow axis, the present solution predicts similarity in an arbitrary plane parallel to the flow axis, which was confirmed using data collected at the surface. Comparisons of present data with available previous results also showed general agreement.     

A Simple Model to Determine In Situ Mixing Height Growth from Surface Measurements

A generic In Situ Mixing Height Growth (IMG) model, capable of predicting the real-time growth of the mixed layer and its diurnal evolution from routinely observed simple surface meteorological is developed. The algorithm for the determination of temporally growing daytime mixing height includes both convective and mechanical turbulence contributions. It accounts for neutral as well as height varying potential temperature gradients above the mixed layer. For thermally stable and mechanically dominated unstable night time Atmospheric Boundary Layer (ABL) the module uses similarity formulae based on the wind velocity [1]), the Monin—Obukhov length [2], and the Coriolis parameter. In the convective case simple slab model is integrated, based on initial lapse rate and the surface heat flux. The lapse rate is evaluated on the basis of vertical atmospheric stability, surface type and surface temperature. This differentiates the IMG model from other existing mixing height models that need initial measured lapse rate for calculation. IMG model is site specific as it calculates the radiative incoming heat flux depending on the solar declination estimates based on-site latitude and longitude. The IMG model is applied to calculate mixing height for India by using surface data (viz. wind speed, surface temperature, surface type) from 152 surface meteorological stations. Results have been evaluated with radiosonde mixing height data procured from 18 upper air stations. Sensitivity analysis of the model with respect to various parameters is performed. The model is formulated after reviewing presently available radiosonde mixing height data in India and can satisfactorily provide an alternative means of estimating mixing height for air pollution dispersion models.     

Persistence and Dissipation of Readymix Formulations of Insecticides In/On Okra Fruits

Dissipation behaviour of ready mix polytrin C 44EC (profenophos 40% + cypermethrin 4%) and spark 36EC (triazophos 35%+.deltamethrin 1%) applied at 1 L/ha in okra crop during Kharif in year 2000 was studied at 0, 1, 3, 5 and 7 days after treatment. Dissipation on 7th day was found to be maximum (98.4%) for profenophos followed by triazophos (86.2%), cypermethrin (73.5%) and deltamethrin (55.7%). Half life (t1/2) values for the above insecticides were 1.35, 2.55, 4.11 and 7.60 days, respectively. All the insecticides followed a first order kinetics. Profenophos and triazophos followed a biphasic dissipation pattern with faster dissipation in phase I (0–1 days) and manifesting slower rate of dissipation in phase II (1–7 days).     

Community structure of earthworms under rubber plantations and mixed forests in Tripura, India

Studies on community structures of earthworms of rubber (Hevea brasiliensis) plantations and their adjacent mixed forests in West Tripura (India) revealed that both the studied sites harvoured 10 earthworm species. Nine species (Pontoscolex corethrurus, Kanchuria sp 1, Metaphire houlleti, Drawida papillifer papillifer, Drawida assamensis, Gordiodrilus elegans, Eutyphoeus assamensis, Eutyphoeus comillahnus and Eutyphoeus gigas) were common to both. While Octochaetona beatrixwas found only in the rubber plantations, Dichogaster affinis was restricted to the mixed forest only. Earthworms were found mostly within 15 cm depth of soils having mean temperature of 27 degrees C, moisture of 23%, pH of 4.57, organic matter of 1.34% and water holding capacity of 36%. Mean earthworm density in rubber plantations (115 ind. m(-2)) was significantly higher (p = 0.003, t = 3.83) than that in the mixed forests (69 ind. m(-2)) due to dominance of Pontoscolex corethrurus, an exotic species. Numbers of dominant species were two (P. corethrurus and D. assamensis) in the rubber plantations and five (P. corethrurus D. assamensis, D. papilliferpapillifer, M. houlleti and Kanchuria sp 1) in the mixed forests. Compared to the mixed forests, significantly low (p<0.05) Shannon diversity index (H) and species evenness and high index of dominance in the rubber plantation were evaluated.     

Potential of conservation agriculture modules for energy conservation and sustainability of rice-based production systems of Indo-Gangetic Plain region

Rice-based cropping systems are the most energy-intensive production systems in South Asia. Sustainability of the rice-based cropping systems is nowadays questioned with declining natural resource base, soil degradation, environmental pollution, and declining factor productivity. As a consequence, the search for energy and resource conservation agro-techniques is increasing for sustainable and cleaner production. Conservation agriculture (CA) practices have been recommended for resource conservation, soil health restoration and sustaining crop productivity. The present study aimed to assess the different CA modules in rice-based cropping systems for energy conservation, energy productivity, and to define energy-economic relations. A field experiment consisted of four different tillage-based crop establishment practices (puddled-transplanted rice followed by (fb) conventional-till maize/wheat (CTTPR-CT), non-puddled transplanted rice fb zero-till maize/wheat (NPTPR-ZT), zero-till transplanted rice fb zero-till maize/wheat (ZTTPR-ZT), zero-till direct-seeded rice fb zero-till maize/wheat (ZTDSR-ZT)), with two residue management treatments (residue removal, residue retention) in rice–wheat and rice–maize rotations were evaluated for energy budgeting and energy-economic relations. Conservation-tillage treatments (NPTPR-ZT, ZTTPR-ZT, and ZTDSR-ZT) reduced the energy requirements over conventional tillage treatments, with the greater reduction in ZTTPR-ZT and ZTDSR-ZT treatments. Savings of energy in conservation-tillage treatments were attributed to reduced energy use in land preparation (69–100%) and irrigation (23–27%), which consumed a large amount of fuel energy. Conservation-tillage treatments increased grain and straw/stover yields of crops, eventually increased the output energy (6–16%), net energy (14–26%), energy ratio (25–33%), and energy productivity (23–34%) as compared with CTTPR-CT. For these energy parameters, the treatment order was ZTDSR-ZT ≥ ZTTPR-ZT > NPTPR-ZT > CTTPR-CT (p < 0.05). Crop residue retention reduced net energy, energy ratio, and energy productivity when compared with residue removal. Our results of energy-economic relations favored the “conservative hypothesis,” which envisages that energy and monetary investments are not essentially the determinants of crop productivity. Thus, zero tillage-based crop establishments (ZTTPR-ZT, ZTDSR-ZT) in rice-based production systems could be the sustainable alternative to conventional tillage-based agriculture (CTTPR-CT) as they conserved non-renewable energy sources, reduced water requirement, and increased crop productivity.

     

A critical review of impact of and adaptation to climate change in developed and developing economies

Rapid change in climate is set to alter the delicate balance that exists between man and nature. It is more so for the region which are ecologically fragile. The literature to this effect points out that the poorest countries and communities are likely to suffer the most because of their geographic locations, low income and low institutional capacity, as well as their greater reliance on climate-sensitive sectors like agriculture. Even if climate mitigations plans are implemented properly there will be some degree of warming due to inertia of emissions already released. As such, there is a strong consensus about the need of adaptation to changing climatic conditions. Adaptation is believed to enhance the resilience against increasing climate variability. In this backdrop, the objective of the present paper is, therefore, to systematically and critically review the existing literature on the impacts of climate change and choice of adaptations across countries and draw insights for suggesting a comprehensive policy framework particularly for developing countries in this regard. The paper finds that the role of government and civil society is crucial for enabling efficient adaptation methods. Development policies and programs having synergy effect with climate change initiatives help adapt with the changing climate better. However, the availability of clean technology in developing countries will play the decisive role in controlling their growth rate of emission. This will be made feasible only when there is a better understanding of the problem between the developed and developing world about the eminent danger arising out of climate change.     

Treatment of phenolic wastewater by horseradish peroxidase immobilized by bioaffinity layering

Horseradish peroxidase was immobilized by bioaffinity layering and used for the treatment of wastewater containing p-chlorophenol. For this purpose, lectin Concanavalin A was bound to Sephadex beads. The glycoenzyme peroxidase was layered upon this Con A layer. Subsequently, alternate layers of the enzyme and Con A were applied. The most efficient design consisted of three layers of Con A and peroxidase each. This immobilized enzyme preparation retained 80% of the activity of the free peroxidase used for immobilization. PEG at the concentration of 0.1 mg ml(-1) was found to prevent enzyme inactivation by the products, although it increased the process time. Thus 60 U ml(-1) of enzyme completely converted the p-chlorophenol (into products) in 4 min in the absence of PEG. On the other hand, only 0.05 U ml(-1) of enzyme was required for this purpose in the presence of PEG but the process required 60 min. Peroxidase converts phenol molecules into free radicals. These free radicals then polymerize and get precipitated. As a further means of minimizing exposure of the enzyme to free radicals and enhancing the reusability, it was decided to remove the enzyme from reaction medium after 10 min. With this strategy, the bioaffinity layered peroxidase preparation could be reused five times without any loss of activity.